Operating principle
The mixture of solid and liquid is distributed uniformly & quickly in centrifuge drum by feeding tube and distributing evenly through the distributing disk. acting on the centrifugal position. Liquid-solid mixed fluid intercept the solid phase through the filter to filter out the liquid phase. Centrifuge continues to feed until full. Then stop. Solid cake is rinsed and purified when the process requires. And the rinsing liquid is filtered out meanwhile. Centrifuge further filter until the separation requirements are met.
At low speed. the scraper scrape off most of the solid cake. and the bag pulling device discharge the residue solid cake to complete a working cycle
Control Process
The operation of centrifuge is controlled by PLC. The system runs automatically according to the preset
program. Different centrifuges have corresponding operating parameters or range of adjustment.
In order to meet the requirements of separation. appropriate operation parameters are set for specific conditions
in debugging and subsequent operation. The control system can automatically repair or protect the overload in
the actual operation.
Automatic control system controls centrifuge mainframe, hydraulic system, pneumatic system, N2 protection system, valve and pump, valve, material conveying system related with centrifuge, etc.
System integration
TONGZE Automatic and intelligent control, remote control and unmanned workshop
TONGZE Fully enclosed, satisfying environmental requirement on closed loop production
Featured configuration
机型
|
PLD
|
LGZ
|
PGZ
|
翻盖形式
|
标准:大翻盖;定制:全翻盖
|
标准:固定盖
|
布料方式
|
标准:斜盘布料;定制:侧向布料
|
防爆配置
|
定制:置换+氧测+气封+液封+蝶阀
|
转速
|
按技术参数
|
在线清洗
|
定制:翻盖清洗+转鼓底清洗+转鼓侧清洗
|
无
|
辅助刮刀
|
无
|
定制:柔性辅助刮刀
|
出液转换阀
|
可按需定制
|
Installation
! Safety:satisfy requirements on dynamic and static loading capacity, shock absorption and isolation, operation and maintenance
! Convenience : Meet the convenience of operation and maintenance
! economical efficiency : Meet the rationality of process chain, reduce logistics turnover link and reduce operation cost
◆ Provide installation foundation draws and related technical supports.